ProductsConveyor belts related products

SUNPAT™ L Repair material for rubber conveyor belts

Room temperature repair material for easy and quick repair of rubber conveyor belts

This is a type of belt repair material that is poured into the defective part of the rubber conveyor belt. The easy installation allows customers to perform the restoration work themselves. Operation can be resumed in a short time (approximately 40 minutes) after the installation is completed.

You can download the catalog of SUNPAT™ L and the Safety Data Sheet (SDS) from the download button below.

SUNPAT™ L Repair material for rubber conveyor belts

Advantages

1. Cures at room temperature, eliminating the need for heat or stress equipment
2. Only simple tools are needed for installation, so customers can do the restoration work themselves.
3. Operation is possible in about 40 minutes after the installation is completed when the ambient temperature is 20±5℃.
4. Adhesion time is longer than when the ambient temperature is 20±5℃, but handling is possible even in winter (15℃ or lower).
5. Possible to apply to various shapes of defects due to its paste form.

Precautions for use

1. Avoid installation when wet with water.
2. If the mixing ratio of the main agent, stiffener, and stiffening agent is not accurate, the product may not cure.
3. The time required for use is short, less than 5 minutes, so please apply the product quickly by mixing stiffener and stiffening agent (1 minute) and repairing (4 minutes).
4. After mixing, it takes about 24 hours to reach final hardness, but cures to a workable state in about 40 minutes.

Contact us Download catalogs & Documents

Contact us